225/60R18vs245/55R18
Proportional side-by-side visual comparison, dimensional specs, speedometer calibration, and fitment guide.
Comparison Summary & Verdict
Comparing 225/60R18 (baseline) to 245/55R18 (target):The 245/55R18 is 0.02" shorter in overall diameter (-0.07%) and 0.79" wider.
Side-by-Side Dimension Specifications
Full dimensional metrics calculated according to ISO standardized tire formulas.
| Specification | 225/60R18 (Stock) | 245/55R18 (Target) | Difference (Delta) |
|---|---|---|---|
| Overall Diameter | 28.63" (727 mm) | 28.61" (727 mm) | -0.02" (-0.07%) |
| Section Width | 8.86" (225 mm) | 9.65" (245 mm) | +0.79" (+20 mm) |
| Sidewall Height | 5.31" (135 mm) | 5.31" (135 mm) | 0.00" |
| Circumference | 89.94" (2284 mm) | 89.88" (2283 mm) | -0.06" |
| Revolutions per Mile | 726 revs/mi | 727 revs/mi | +1 revs/mi |
| Wheel Rim Diameter | 18" | 18" | Same wheel diameter (Direct fit) |
| Recommended Rim Width | 6.1" – 7.9" | 6.6" – 8.6" | n/a |
Speedometer & Odometer Calibration Table
Because vehicle speedometers measure axle rotation, changing tire circumference alters speed readings. When switching from 225/60R18 to 245/55R18:
| Actual Speed (GPS) | Speedometer Reading on 245/55R18 | Variance / Error |
|---|---|---|
| 20 mph | 20.0 mph | +0.0 mph |
| 30 mph | 30.0 mph | +0.0 mph |
| 45 mph | 45.0 mph | +0.0 mph |
| 60 mph | 60.0 mph | +0.0 mph |
| 70 mph | 70.0 mph | +0.0 mph |
| 80 mph | 80.1 mph | +0.1 mph |
Fitment & Practical Considerations
Clearance & Rubbing
Because 245/55R18 has very similar dimensions to 225/60R18 (only 0.02" diameter difference), clearance issues or fender rubbing are extremely unlikely on stock suspension.
Gearing & Acceleration
Gearing and acceleration changes will be negligible between these two sizes.
Wheel & Rim Width
Both sizes use a standard 18" wheel rim. Ensure your existing rim width falls within 6.6" to 8.6" for optimal tire bead seating.
Official Calculation Standards & References
All dimension formulas, revs/mile conversions, rim width brackets, and speedometer error deltas on Tire Visualizer are calculated strictly according to international automotive engineering standards:
ISO 4000-1 metric tire dimensional standards, section width ratios, and approved measuring rim definitions.
North American standards for overall tire diameter, static loaded radius, and revolutions-per-mile benchmarks.
Federal motor vehicle safety standards governing pneumatic tire sizing, load indices, and speedometer tolerance limits.
Engineering standards (SAE J2047 & J1982) for dynamic tire rolling radius and speedometer calibration accuracy.
Frequently Asked Questions: 225/60R18 vs 245/55R18
Can I replace 225/60R18 with 245/55R18?
Yes. The diameter difference between 225/60R18 and 245/55R18 is -0.07%, which is within the industry standard ±3% safety margin. It is generally a safe direct replacement without requiring speedometer recalibration or suspension modifications.
How does 245/55R18 affect my speedometer compared to 225/60R18?
When driving at an actual speed of 60 mph on 245/55R18, your speedometer will read 60 mph (a difference of 0.0 mph). Your vehicle will be traveling slightly slower than indicated.
Will 245/55R18 change my vehicle's ride height?
245/55R18 has an overall diameter of 28.61" compared to 28.63" on 225/60R18. This will change your ground clearance by -0.01 inches (lower).
What wheel rim width is needed for 245/55R18?
For 245/55R18, the recommended wheel rim width range is typically 6.6" to 8.6" wide, mounted on a 18" diameter wheel.
Compare Other Tire Sizes
Select any two tire sizes to generate an instant visual diagram.