245/35R20vs345/25R20
Proportional side-by-side visual comparison, dimensional specs, speedometer calibration, and fitment guide.
Comparison Summary & Verdict
Comparing 245/35R20 (baseline) to 345/25R20 (target):The 345/25R20 is 0.04" taller in overall diameter (+0.15%) and 3.93" wider.
Side-by-Side Dimension Specifications
Full dimensional metrics calculated according to ISO standardized tire formulas.
| Specification | 245/35R20 (Stock) | 345/25R20 (Target) | Difference (Delta) |
|---|---|---|---|
| Overall Diameter | 26.75" (679 mm) | 26.79" (680 mm) | +0.04" (+0.15%) |
| Section Width | 9.65" (245 mm) | 13.58" (345 mm) | +3.93" (+100 mm) |
| Sidewall Height | 3.38" (86 mm) | 3.4" (86 mm) | +0.02" |
| Circumference | 84.04" (2135 mm) | 84.17" (2138 mm) | +0.13" |
| Revolutions per Mile | 777 revs/mi | 776 revs/mi | -1 revs/mi |
| Wheel Rim Diameter | 20" | 20" | Same wheel diameter (Direct fit) |
| Recommended Rim Width | 6.6" – 8.6" | 9.3" – 12.1" | n/a |
Speedometer & Odometer Calibration Table
Because vehicle speedometers measure axle rotation, changing tire circumference alters speed readings. When switching from 245/35R20 to 345/25R20:
| Actual Speed (GPS) | Speedometer Reading on 345/25R20 | Variance / Error |
|---|---|---|
| 20 mph | 20.0 mph | -0.0 mph |
| 30 mph | 30.0 mph | -0.0 mph |
| 45 mph | 44.9 mph | -0.1 mph |
| 60 mph | 59.9 mph | -0.1 mph |
| 70 mph | 69.9 mph | -0.1 mph |
| 80 mph | 79.9 mph | -0.1 mph |
Fitment & Practical Considerations
Clearance & Rubbing
Because 345/25R20 is significantly different in size (+0.04" taller), check clearance with suspension components, brake calipers, and wheel wells at full steering lock and full compression.
Gearing & Acceleration
Gearing and acceleration changes will be negligible between these two sizes.
Wheel & Rim Width
Both sizes use a standard 20" wheel rim. Ensure your existing rim width falls within 9.3" to 12.1" for optimal tire bead seating.
Official Calculation Standards & References
All dimension formulas, revs/mile conversions, rim width brackets, and speedometer error deltas on Tire Visualizer are calculated strictly according to international automotive engineering standards:
ISO 4000-1 metric tire dimensional standards, section width ratios, and approved measuring rim definitions.
North American standards for overall tire diameter, static loaded radius, and revolutions-per-mile benchmarks.
Federal motor vehicle safety standards governing pneumatic tire sizing, load indices, and speedometer tolerance limits.
Engineering standards (SAE J2047 & J1982) for dynamic tire rolling radius and speedometer calibration accuracy.
Frequently Asked Questions: 245/35R20 vs 345/25R20
Can I replace 245/35R20 with 345/25R20?
Yes. The diameter difference between 245/35R20 and 345/25R20 is 0.15%, which is within the industry standard ±3% safety margin. It is generally a safe direct replacement without requiring speedometer recalibration or suspension modifications.
How does 345/25R20 affect my speedometer compared to 245/35R20?
When driving at an actual speed of 60 mph on 345/25R20, your speedometer will read 59.9 mph (a difference of 0.1 mph). Your vehicle will be traveling slightly faster than indicated.
Will 345/25R20 change my vehicle's ride height?
345/25R20 has an overall diameter of 26.79" compared to 26.75" on 245/35R20. This will change your ground clearance by +0.02 inches (lift).
What wheel rim width is needed for 345/25R20?
For 345/25R20, the recommended wheel rim width range is typically 9.3" to 12.1" wide, mounted on a 20" diameter wheel.
Compare Other Tire Sizes
Select any two tire sizes to generate an instant visual diagram.