245/40R19vs325/30R19
Proportional side-by-side visual comparison, dimensional specs, speedometer calibration, and fitment guide.
Comparison Summary & Verdict
Comparing 245/40R19 (baseline) to 325/30R19 (target):The 325/30R19 is 0.04" shorter in overall diameter (-0.15%) and 3.15" wider.
Side-by-Side Dimension Specifications
Full dimensional metrics calculated according to ISO standardized tire formulas.
| Specification | 245/40R19 (Stock) | 325/30R19 (Target) | Difference (Delta) |
|---|---|---|---|
| Overall Diameter | 26.72" (679 mm) | 26.68" (678 mm) | -0.04" (-0.15%) |
| Section Width | 9.65" (245 mm) | 12.8" (325 mm) | +3.15" (+80 mm) |
| Sidewall Height | 3.86" (98 mm) | 3.84" (98 mm) | -0.02" |
| Circumference | 83.93" (2132 mm) | 83.81" (2129 mm) | -0.12" |
| Revolutions per Mile | 778 revs/mi | 779 revs/mi | +1 revs/mi |
| Wheel Rim Diameter | 19" | 19" | Same wheel diameter (Direct fit) |
| Recommended Rim Width | 6.6" – 8.6" | 8.8" – 11.4" | n/a |
Speedometer & Odometer Calibration Table
Because vehicle speedometers measure axle rotation, changing tire circumference alters speed readings. When switching from 245/40R19 to 325/30R19:
| Actual Speed (GPS) | Speedometer Reading on 325/30R19 | Variance / Error |
|---|---|---|
| 20 mph | 20.0 mph | +0.0 mph |
| 30 mph | 30.0 mph | +0.0 mph |
| 45 mph | 45.1 mph | +0.1 mph |
| 60 mph | 60.1 mph | +0.1 mph |
| 70 mph | 70.1 mph | +0.1 mph |
| 80 mph | 80.1 mph | +0.1 mph |
Fitment & Practical Considerations
Clearance & Rubbing
Because 325/30R19 is significantly different in size (-0.04" shorter), check clearance with suspension components, brake calipers, and wheel wells at full steering lock and full compression.
Gearing & Acceleration
Gearing and acceleration changes will be negligible between these two sizes.
Wheel & Rim Width
Both sizes use a standard 19" wheel rim. Ensure your existing rim width falls within 8.8" to 11.4" for optimal tire bead seating.
Official Calculation Standards & References
All dimension formulas, revs/mile conversions, rim width brackets, and speedometer error deltas on Tire Visualizer are calculated strictly according to international automotive engineering standards:
ISO 4000-1 metric tire dimensional standards, section width ratios, and approved measuring rim definitions.
North American standards for overall tire diameter, static loaded radius, and revolutions-per-mile benchmarks.
Federal motor vehicle safety standards governing pneumatic tire sizing, load indices, and speedometer tolerance limits.
Engineering standards (SAE J2047 & J1982) for dynamic tire rolling radius and speedometer calibration accuracy.
Frequently Asked Questions: 245/40R19 vs 325/30R19
Can I replace 245/40R19 with 325/30R19?
Yes. The diameter difference between 245/40R19 and 325/30R19 is -0.15%, which is within the industry standard ±3% safety margin. It is generally a safe direct replacement without requiring speedometer recalibration or suspension modifications.
How does 325/30R19 affect my speedometer compared to 245/40R19?
When driving at an actual speed of 60 mph on 325/30R19, your speedometer will read 60.1 mph (a difference of -0.1 mph). Your vehicle will be traveling slightly slower than indicated.
Will 325/30R19 change my vehicle's ride height?
325/30R19 has an overall diameter of 26.68" compared to 26.72" on 245/40R19. This will change your ground clearance by -0.02 inches (lower).
What wheel rim width is needed for 325/30R19?
For 325/30R19, the recommended wheel rim width range is typically 8.8" to 11.4" wide, mounted on a 19" diameter wheel.
Compare Other Tire Sizes
Select any two tire sizes to generate an instant visual diagram.