305/35R19vs355/30R19
Proportional side-by-side visual comparison, dimensional specs, speedometer calibration, and fitment guide.
Comparison Summary & Verdict
Comparing 305/35R19 (baseline) to 355/30R19 (target):The 355/30R19 is 0.02" shorter in overall diameter (-0.07%) and 1.97" wider.
Side-by-Side Dimension Specifications
Full dimensional metrics calculated according to ISO standardized tire formulas.
| Specification | 305/35R19 (Stock) | 355/30R19 (Target) | Difference (Delta) |
|---|---|---|---|
| Overall Diameter | 27.41" (696 mm) | 27.39" (696 mm) | -0.02" (-0.07%) |
| Section Width | 12.01" (305 mm) | 13.98" (355 mm) | +1.97" (+50 mm) |
| Sidewall Height | 4.2" (107 mm) | 4.19" (106 mm) | -0.01" |
| Circumference | 86.1" (2187 mm) | 86.04" (2185 mm) | -0.06" |
| Revolutions per Mile | 759 revs/mi | 759 revs/mi | 0 revs/mi |
| Wheel Rim Diameter | 19" | 19" | Same wheel diameter (Direct fit) |
| Recommended Rim Width | 8.2" – 10.7" | 9.6" – 12.4" | n/a |
Speedometer & Odometer Calibration Table
Because vehicle speedometers measure axle rotation, changing tire circumference alters speed readings. When switching from 305/35R19 to 355/30R19:
| Actual Speed (GPS) | Speedometer Reading on 355/30R19 | Variance / Error |
|---|---|---|
| 20 mph | 20.0 mph | +0.0 mph |
| 30 mph | 30.0 mph | +0.0 mph |
| 45 mph | 45.0 mph | +0.0 mph |
| 60 mph | 60.0 mph | +0.0 mph |
| 70 mph | 70.0 mph | +0.0 mph |
| 80 mph | 80.1 mph | +0.1 mph |
Fitment & Practical Considerations
Clearance & Rubbing
Because 355/30R19 is significantly different in size (-0.02" shorter), check clearance with suspension components, brake calipers, and wheel wells at full steering lock and full compression.
Gearing & Acceleration
Gearing and acceleration changes will be negligible between these two sizes.
Wheel & Rim Width
Both sizes use a standard 19" wheel rim. Ensure your existing rim width falls within 9.6" to 12.4" for optimal tire bead seating.
Official Calculation Standards & References
All dimension formulas, revs/mile conversions, rim width brackets, and speedometer error deltas on Tire Visualizer are calculated strictly according to international automotive engineering standards:
ISO 4000-1 metric tire dimensional standards, section width ratios, and approved measuring rim definitions.
North American standards for overall tire diameter, static loaded radius, and revolutions-per-mile benchmarks.
Federal motor vehicle safety standards governing pneumatic tire sizing, load indices, and speedometer tolerance limits.
Engineering standards (SAE J2047 & J1982) for dynamic tire rolling radius and speedometer calibration accuracy.
Frequently Asked Questions: 305/35R19 vs 355/30R19
Can I replace 305/35R19 with 355/30R19?
Yes. The diameter difference between 305/35R19 and 355/30R19 is -0.07%, which is within the industry standard ±3% safety margin. It is generally a safe direct replacement without requiring speedometer recalibration or suspension modifications.
How does 355/30R19 affect my speedometer compared to 305/35R19?
When driving at an actual speed of 60 mph on 355/30R19, your speedometer will read 60 mph (a difference of 0.0 mph). Your vehicle will be traveling slightly slower than indicated.
Will 355/30R19 change my vehicle's ride height?
355/30R19 has an overall diameter of 27.39" compared to 27.41" on 305/35R19. This will change your ground clearance by -0.01 inches (lower).
What wheel rim width is needed for 355/30R19?
For 355/30R19, the recommended wheel rim width range is typically 9.6" to 12.4" wide, mounted on a 19" diameter wheel.
Compare Other Tire Sizes
Select any two tire sizes to generate an instant visual diagram.